Firmware archive for EF-E Smart Adapter MARK IV and EF-E Speed Booster ULTRA

FIRMWARE HISTORY FOR EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA:

• Name: Firmware update V0.57 for EF-E Smart Adapter^TM MARK IV/V and EF-E Speed Booster® ULTRA
• Release date: 26 Jun 2017
• Benefits and improvements: 
  • Added autofocus support during high speed and medium speed continuous drive (up to 10fps) on Sony A9 ("Green" mode only). Experiment with the "Priority Set in AF-C" setting for the best compromise between hit rate and frame rate for your shooting style. Overall performance depends on lens used. The camera does not use hunting while tracking is in operation. If subject movement exceeds the measurement range of the OSPDAF sensor, autofocus pauses. This is by design. The measurement range of the OSPDAF sensor decreases as the focal length increases. Except for the original Mark I Smart Adapter this feature is available for all subsequent Speed Boosters and Smart Adapters.
  • Enabled AF illuminator (Advanced mode only).
  • There is an AF accuracy issue when using AF-S or DMF on Sony A9 and telephoto lenses with Metabones in "Advanced" mode, which affects this and all previous firmware versions. Green mode, which is set by default on Sony A9, is not affected (except for the original Smart Adapter Mark I, which does not support "Green" mode). A9 users are advised to not use "Advanced" mode but stick with the default "Green" mode. In addition, some telephoto lenses rarely exhibit this issue, such as EF 200/2.8L II USM, EF 400/5.6L USM and Tamron 150-600/5-6.3 VC USD A011. Investigation of this issue is still in progress.
  • Fixed AF issue with EF-S 10-18mm f/4.5-5.6 IS STM and EF-S 18-135/3.5-5.6 IS Nano USM lenses.
  • Fixed smooth iris support for 40/2.8 STM, 50/1.8 STM and Sigma 50-100/1.8 DC HSM Art 016.
  • Fixed CN-E 18-80 T4.4 L IS KAS S servo zoom used by the camera's zoom rocker and the lens' rocker in alternation.
  • Fixed CN-E 18-80 T4.4 L IS KAS S auto iris when adapter is in Green mode, where extremely bright conditions no longer causes the iris to close completely.         
  • Fixed aperture display with Canon EF 300mm f/4L IS USM lens and Kenko Pro 300 teleconvertter.
  • Corrected W-T zoom scale display in "Advanced" mode for Speed Booster and Kenko Pro 300  teleconverter (except Mark I/II/III and original Speed Booster).
  • Faster aperture diaphragm for still photography in Advanced mode when Live Vide mode is set to Setting Effect OFF.
  • LED (if available) now shows solid magenta when adapter is connected to USB waiting for Metabones App to run.

• Name: Firmware update V0.56 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA
• Release date: 13 Apr 2017
• Benefits and improvements: 
  • Fixed issue with SteadyShot icon on LCD display of the camera not corresponding to IS switch of Tamron 150-600/5-6.3 VC USD A011 when "choose between OIS and IBIS automatically" is chosen.
  • Fixed blackout issue with A7S running Time Lapse application.
  • Fixed issue with certain full frame lenses misidentified as cropped lenses (but the reverse may still occur).
  • Auto iris, servo zoom, autofocus and custom function button support for CN-E 18-80 T4.4L lens (except Mark I/II/III and original Speed Booster).
  •  Compatibility fix for Contax N lenses modified by Conurus Canada on CINE Smart Adapter, CINE Speed Booster, Mark V and Speed Booster ULTRA II.

• Name: Firmware update V0.55 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA
• Release date: 13 Jan 2017
• Benefits and improvements: 
  • Fix AF accuacy issue.
  • Introduce downgrade feature to go back to V0.53

• Name: Firmware update V0.54 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA
• Release date: 16 Dec 2016
• Benefits and improvements: 
  • Fixed autocrop recognition of Tamron 18-270/3.5-6.3 VC PZD B008 as a cropped lens.
  • Fixed issue when "choose between OIS and IBIS automatically" is selected in Metabones App, Tamron 24-70/2.8 VC USD A007 would still be turned on in Green mode after an exposure.
  • Fixed issues with Tamron 150-600/5-6.3 Di VC USD A011.
  • Added an option in Metabones App to enable the use of Digital Zoom in Advanced mode.
  • Stability improvement

• Name: Firmware update V0.53 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA
• Release date: 4 Nov 2016
• Benefits and improvements: 
  • Easier user interface to select between Green and Advanced mode using Metabones App, with separate settings for newer cameras and older cameras (except Mark I/II/III and original Speed Booster).
  • Fix operation of Kenko Pro300 DGX (green dot) stacked on EF Extender III.
  • Option to park focus to infinity upon shutdown to shorten its length for storage (except Mark I/II/III and original Speed Booster). Some lenses may disregard this setting but never park focus, and most of these are internal focus lenses which do not require parking. STM lenses always observe the option setting.
  • Shortened shutdown time for IS lenses.
  • Option to close down the aperture or leave it where it is when camera shuts down (except Mark I/II/III and original Speed Booster).
  • Option to let camera body decide whether OIS, IBIS or a combination thereof shall be selected (except Mark I/II/III and original Speed Booster).
  • AF accuracy improvement for subjects near infinity.
  • Fixed autocrop of Sigma 50-100/1.8 DC HSM Art 016.
  • Stability improvement.
  • Fixed issue with Tamron VC USD where autofocus may occasionally become inoperative.

• Name: Firmware update V0.52 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA
• Release date: 30 Jun 2016
• Benefits and improvements: (more detail may refer to press release)
  • You have spoken and we have listened. "Green" is the default mode again.
  • "Advanced" mode AF-C improvements.
  • Fixed manual focus distance display with focus-by-wire lenses (e.g. 85/1.2L, STM lenses). 

• Name: Firmware update V0.50 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA
• Release date: 23 Jun 2016
• Benefits and improvements: 
  • Wide open button functionality is removed on A7 series and A6300. The button of the adapter is now dedicated to the function of the customizable Focus Hold button on the A7 series and A6300.
  • "Advanced" mode is now the default operating mode. (Based on customer feedback most A6300/A7II/A7RII users prefer "Green" mode instead. You may change the default to "Green" mode, by holding down the button on the adapter while attaching to an already-on camera, and then, without ever releasing the button, turn off the camera's power. Changing the default back to "Advanced" mode using the same procedure.)
  • "Native" autofocus features including DMF, Eye-AF and fast CDAF on all E-mount cameras (see Press Release for details).
  • Support for smooth iris feature of the latest Canon and Tamron SP lenses.
  • PDAF improvement for Canon EF 50/1.4 USM and some other large aperture fixed focal length lenses.
  • Descriptive lens name on EXIF LensModel tag (except on older cameras and Metabones Mark I, Mark II, Mark III and the original Speed Booster). A complaint utility such as exiftool is required. Sony Image Data Converter does NOT display the LensModel tag.
  • Fixed a focus parking issue after an exposure with some older Canon lenses.

• Name: Firmware update V0.49 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA
• Release date: 13 Apr 2016
• Benefits and improvements: 
  • Support the case where EF Extender is attached first before the EF L series lens is attached to the Extender in Green mode. 
  • Fixed W-T indicator display in Advanced mode with Contax N Vario-Sonnar 24-85/3.5-4.5 lens.This version contains only minor enhancements.
  • PDAF supports for Tamron SP 45/1.8 Di VC USD F013.

• Name: Firmware update V0.48 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster^TM ULTRA
• Release date: 19 Feb 2016
• Benefits and improvements: 
  • Phase detect AF support for Tamron 17-50/2.8 VC on A7II and A7RII (but no contrast-detect AF support for that lens).
  • This version contains only minor enhancements. If your adapter is already at version 47 there is no need to update.

• Name: Firmware update V0.47 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA
• Release date: 23 Nov 2015
• Benefits and improvements: 
  • A7II firmware 2.0 autofocus support.
  • f/8 autofocus support for EF Extender 1.4x and EF Extender 2x (all versions)
    
    Note: you do not need to install version 47 if your adapter is already at version 46 and you do not need A7II or EF Extender support.

• Name: Firmware update V0.46 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA
• Release date: 10 Nov 2015
• Benefits and improvements: 
  • Faster wake up from sleep after auto power off.
  • A7RII PDAF speed improvement for most lenses.
  • Fixed an intermittent issue with the camera's MENU exiting on its own when pressed for the first time.
  • Corrected identification of Sigma 35/1.4 and Sigma 30/1.4 when APS-C/Super35 capture is set to "Auto".
  • Fixed an iris issue with Tamron 70-200/2.8 VC A009 after a power off/on cycle.
  • Decreased IS motor noise when the camera is turned off.
  • Autofocus support for ILCE-7SM2 (A7sII).
  • Fixed iris operation of Tamron 28-300VC(A20) in Advanced Mode.

• Name: Firmware update V0.45 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster^TM ULTRA
• Release date: 6 Oct 2015
• Benefits and improvements: 
  • A7RII PDAF speed improvement for some wide angle, normal and medium telephoto lenses
  • Fixed an intermittent overexposure issue on A7RII
  •  Fixed an intermittent start-up issue on A7S
  • Stability improvement

• Name: Firmware update V0.44 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster^TM ULTRA
• Release date: 22 Sep 2015
• Benefits and improvements: 
  • Fixed IBIS switch issue on A7II and A7RII with IS lenses introduced V.43

• Name: Firmware update V0.43 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster^TM ULTRA
• Release date: 18 Sep 2015
• Benefits and improvements: (Please refer to the press release for more detail.)
  • ILCE-7RM2 (A7RII) support
  • Autofocus improvements
  • Fixed issue when Aperture Preview is assigned on A7 series to Focus Hold button (WO button of the adapter)

• Name: Firmware update V0.41 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA
• Release date: 1 Jun 2015
• Benefits and improvements:

  • User may choose between lens OIS and IBIS using the lens' IS switch (except for some Tamron lenses). If the lens' IS switch is ON, lens OIS is used and IBIS is turned off automatically. If lens' IS switch is OFF, IBIS is used instead. To turn off all IS, hold down the WO button on the adapter while switching the lens' IS to the OFF position.

  • IS is always turned on during magnified focus assist for ease of manual focusing

  • Added autofocus support for some legacy lenses on A7 series

  • Eliminated iris flicker when opening up the iris from a slower aperture to a faster aperture in Green mode on FS series, NEX-VG series and A7 series in movie mode.

  • Eliminated iris tick noise while zooming a variable aperture zoom lens in Green mode

• Name: Firmware update V0.40 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA
• Release date: 3 Feb 2015
• Benefits and improvements:
  • In "Green" mode, wide open button on adapter serves double-duty as assignable "Focus hold" button found on Sony G series lenses. You may for example assign "Aperture Preview" to the the "Focus Hold" button on A7II and get the same DOF preview function as on a Canon DSLR.
  • Image Stabilization ON/OFF status is displayed on A7II as the SteadyShot icon. 
  • Adds support for Sony A7s silent shutter mode.
  • Fixed Sony A7s intermittent startup issue.
  • More detailed EXIF data.
  • Reliability improvements with some Sigma and Tamron lenses. 
  • Fixed distance display (in Advanced mode) on VG, FS and A7 series.
  • Fixed EF70-200/2.8L IS II USM's IS on/off switch intermittently inoperative issue. 
  • Fixed issue of EF40/2.8 STM being wrongly identified as an OSS lens.
  • Fixed NEX-5N becoming unresponsive issue when movie capture started

• Name: Firmware update V0.39 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster^TM ULTRA
• Release date: 29 Dec 2014
• Benefits and improvements
  • Improves Sony A7S compatibility

• Name: Firmware update V0.38 for EF-E Speed Booster® ULTRA
• Release date: 20 Nov 2014
• Benefits and improvements
  • (Speed Booster ULTRA only) Due to FS7 can not support aperture faster than f/1.0 , 
    lenses slower than f/1.4 report boosted aperture to camera body; lenses at or faster than f/1.4 report original aperture to camera body, in order to address a FS7 compatibility issue.
• Name: Firmware update V0.37 for EF-E Smart Adapter^TM MARK IV
• Release date: 20 Nov 2014
• Benefits and improvements
  • Improves stability with some lenses
     
• Name: Firmware update V0.36 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA
• Release date: 31 Oct 2014
• Benefits and improvements
  • E mount ver 0.36
  • Fixes Zeiss ZE lens stability issue with adapter firmware version 0.33 and version 0.34

• Name: Firmware update V0.34 for EF-E Smart Adapter^TM MARK IV and EF-E Speed Booster® ULTRA
• Release date: 8 Oct 2014
• Benefits and improvements
  • Bug Fix and Improve the performance.
  • Fix Auto-Magnify/MF function on advance mode.

• Name: Firmware update V0.32 for EF-E Smart Adapter^TM MARK IV
• Release date: 13 Aug 2014
• Benefits and improvements
  • Sony A7S compatibility